Build your own pallet tv stand! The PDF plans include a material cut list, a list of necessary tools & hardware, assembly directions, and dimensions. The overall dimensions of the tv stand are 45” W x 15” L x 21” H.
This entire project was constructed from pallet boards. Before beginning this build, break down a few pallets and set aside the lumber. Remember, always work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
First, build the tabletop and middle/bottom shelves. Glue each of the boards together and clamp till wood glue dries, Then, use 3/4” screws to fasten the cross member for added weight support. NOTE: The middle and bottom shelves have the same measurements.
Connect the tabletop and shelves to each leg. You can use 1” screws for a stronger hold. To prevent splitting, predrill the holes before putting in screws. NOTE: If you want to hide the screws for a cleaner look use pocket holes on the inside for each level.
Add trim pieces. Use a brad nailer to attach the trim pieces to the outside of each shelf.
Add divider and cross members. Slide in the divider and secure it with brad nails from the top and bottom. Then, nail each cross member in place. Finish the look with wicker baskets for storage. (11 1/2” L x 10” W x 9” H)